How to maintain the door of the lacquer that bake

the lacquer that bake is now more people choose a door, it USES high temperature drying and fuel injector technology production, the making craft of the door of the lacquer that bake is difficult, the rejection rate is quite high. It not only has the characteristics of many other types of door no, in the use of it in the process of door of the lacquer that bake to maintain what's the point? Wood door manufacturer to introduce for everybody below

1, the door of the lacquer that bake is in use process, should avoid using a wet cloth to wipe the surface of door plank, because especially in the integrity of the paint film is too humid environment may be damaged, paint film crack will happen;

2, door in use process should try to avoid the impact of the lacquer that bake door plank, high quality door plank of the coating film hardness is controlled in 2 h, which is 10 kilograms of weight on surface of door plank, door plank may appear pit, door plank paint film is not a massive loss;

3, door plank of the coating film can cause discoloration due to high temperature, and the fire prevention performance is poor, so in use process should try to avoid direct sunlight door plank 6 cleaning: in use process, it is hard to avoid inside the kitchen lampblack, when the surface of the integral ambry door plank have lampblack, oily be soiled, can wipe usable scour, use detergent: water = 1:10 clean cotton cloth to wipe the

4. Anti high temperature, sunshine point-blank, door plank of the coating film can cause discoloration due to high temperature, therefore in use process should try to avoid direct sunlight door plank.

5。 Paint acid alkali is generally poor, in use process should try to avoid acidic, alkaline material contact surface of the lacquer that bake door plank, in order to avoid corrosion door plank of paint film, if in use process accidentally spilled the soy sauce, vinegar on door plank surface should be immediately) with a clean cotton cloth dipped a little water to wipe

6. Paint film thickness on the surface of the door plank in 0. About 3 mm, in use process should avoid sharp things door plank surface.

again good also cannot leave the maintenance door, only to maintain more durable. It must master the points of maintenance, the above is about the lacquer that bake door maintenance time, remember to maintain!