Install the wooden door how method?

by:Runcheng Chuangzhan     2020-08-18

corner wall, t-shaped wall openings to choose the size was 60 mm to 100 mm wide suit door, installation time sticks do false wall, other false wall width 60 mm to 100 mm, wooden door manufacturer to give us the installation of wooden door what method?

1。 Before the installation measurement door width and height, wall thickness, and the goods size is consistent.

2。 Prepare assembly frame, cross pein ( The frame width) Cover the two vertical box ( Refers to the altitude) The above. Good amount of door leaf width and height, the fixed cross pein and mullion, measured mullion between greater than 60 mm, straight mouth and straight mouth cross pein straight opening between the ground and the height of the 13 mm higher than the door leaf and then use 4 60 mm long screw or steel nailsin connect two mullion, three pieces of frame straight opening must be in the same plane, horizontal box and mullion after joining together into a 90 degree Angle, installed on both sides of mullion 4 to 6 piece connection piece.

3。 Messenger wire hammer put the assembled frame in the door, vertical mullion need to install the door leaf, the vertical frame and the wall cracks, if use wood or injection plastic foam fixed firmly.

4。 Fixed after one side of the door leaf mullion, the hinge is installed on the doors, doors should be installed on the hinge position on the door leaf below about 200 mm, with screw will hinge on the doors installation is firm, and then install the door leaf to the fixed mullion, upper and lower hinge door hinge with a screw first temporarily fixed to the frame, after checking with lock doors closed mullion gap is in the same plane, door leaf with and without drop, finally pull lock mullion and wall body with tight, make the gap consistent around, not to 'open', doors, locks must be flexible switch after installation.

5。 Door leaf and the doorframe firmly, installation lines will first lateral head line is suitable for cutting into a 45 degree Angle and then mullion line right size cut into a 45 degree Angle in the direction shown by the cross pein installation, remove the line two article cover nail, with a nail fixed line after the cover article nail the cover back on the line.

6。 Correct position of the suction installation for its doors lock a side in the bottom Angle to 80 mm, 50 mm up intersection location.

7。 After the installation should check whether the door leaf is comprehensive and flexible, leave a gap compliance.

Guangdong Runcheng Chuangzhan Woodworking Co., Ltd. is famous for creating innovative products like the wood door manufacturers and supporting their market leadership with savvy marketing campaigns to build an elite brand.
Looking for someone to handle your wood door manufacturers wood interior doors for sale needs? Check out Runcheng Chuangzhan Woodworking today for more information.
It's the consistent experience that builds trust and loyalty. Creating a personality and platform that is scalable will allow you to evolve wood door manufacturers with your consumers.
Guangdong Runcheng Chuangzhan Woodworking Co., Ltd. also has an extensive line of products as wood door manufacturers.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...