Acceptance of what the main points of the wooden door?1

wooden door to the success of the installation acceptance, wooden door factory give us the main points of the wooden door acceptance today have?

1, appearance is beautiful: wood surface coating to be smooth, bright, no flow, quality defects such as bubbles, wrinkles, no corrosion points, dead section, the broken; Infiltrate right set of use shall be coordinated with door leaf wood, color wood, wood veneer and lines are not big color difference, tree species should be the same.

2, door leaf to founder, not buckling deformation: the door leaf can just plug into the door, and in conformity with the doorframe: if the door leaf and frame gap is big, mainly because no or shaved when installation frame is not vertical with the ground, they can be unloaded to shaved; If frame is not vertical, should find straight within the frame plate gasket.

3, hinge to position accurately, installation is firm, if the hinge is on, will cause the door leaf and frame sets don't match, door switch is not smooth. Each hinge can be unscrewed the first a screw, and then adjust the door leaf and frame alignment, adjustment to repair and correct then tighten all the screws. If the hinge screws, nail or screw on the inside, no screw, screw or twist Angle, can lead to the door leaf to play around. Should be replaced right screws, screw must be straight, when screw should be nails into a third, the rest to turn in.

4, locks, lock to smoothly, the lock on the door leaf and door frame to fit two parts: the lock is not suitable, will cause the door leaf switch does not freely. Lock tongue plate shall be unloaded, groove with a chisel repair tongue, adjust the door lock tongue mouth position again after installation. In addition, the door open direction also should conform to the requirements.

5, the door inside have the base materials: door cover made of joinery board or density board, should be first basal plate fixed on the frame at the grass-roots level keel, nail line again; After the door should be made from wood frame, plane, the plane straight, then molding assembly is installed on the wall, and covers the base plate and garnish panel. Knock the door side panels with the hand, if the empty drum, means that no bottom cushion joinery board board at the grass-roots level, should remove redo.

In an age when wood door manufacturers is increasingly important, the researchers believe manufacturers should pay close attention to their results.

Hard work and performance is rewarded through bonuses and commissions. Job satisfaction is very important for employees and owners, Guangdong Runcheng Chuangzhan Woodworking Co., Ltd. will create a work environment that is enjoyable and profitable for all.

Guangdong Runcheng Chuangzhan Woodworking Co., Ltd. has developed a unique technology with many applications including wooden door designs for main door.